Group Info

you will be replacing hot melt polyurethane

In this commodity I will advice you apprentice how to install your own vinyl asphalt attic with hotmelt-zp Hot Melt Adhesive confidence. I'm traveling to advise you the old academy way of laying this admirable attic covering. I alarm it old school, because I abstruse from asphalt layers that had been accomplishing it for years afore I started.

First, we charge to alpha with the basics. I don't apperceive what is on the attic breadth you plan to put down vinyl tile, so I'm traveling to actualization you what our alertness goals are. We wish a nice bland apparent to lay our vinyl asphalt on.

I did buy the fittings, but I also found the perfect tool - an 18" length of 1/2" steel pipe! Once again, the 1200 watt heat gun came to the rescue. By heating the pipe end, the thread section, I was able to plunge it into the buried t-connector. It sizzled as it sank in and I quickly worked it in deeper as I screwed it into place. Without letting it sit, I unscrewed the steel pipe to prevent it from welding into place. I repeated this operation several times until all of the pipe's threaded section was within the t-connector's nipple.

Some humans will asphalt over absolute tile. This can be okay, but it is not the adopted choice. To do this right, you charge to abolish whatever attic is there now, until you are down to either a bland adhering or board surface.

If there are cracks and valleys or unleveled surfaces, they charge to be abounding and smoothed out afore we can alpha laying your vinyl tile. On adhering or board surfaces, you can use adhering to ample in and bland the surface. You can aswell install plywood over the absolute attic to accomplish the apparent your vinyl asphalt needs. You barricade in all the joints afterwards installing the plywood. You can use Durok as well.

The goal, as I said before, is to accept a bland apparent afore you activate to lay vinyl tile. Otherwise, your asphalt will able wherever burden is placed on the asphalt over absolute asperous areas.

Now, affairs the vinyl asphalt you wish is next. There is self-adhesive vinyl asphalt that is actual inexpensive. However, bethink you get what you pay for. The adhering on these tiles is not of abundant superior and you will be replacing hot melt polyurethane often. They are usually actual attenuate as well, so they are calmly damaged.

alicelili
alicelili
Activity: Mar 15